Microfluidics
PyroScience offers special oxygen nanoprobes for applications in microfluidics. These nanoparticles incorporate our REDFLASH indicator which responds to the oxygen partial pressure inside the chip.
Additionally, it is possible to use sensor spots for oxygen, pH and temperature measurements and integrate this sensor spots into the microfluidic chip.
With our PICO-O2 read-out device it is possible to measure oxygen of even tiny spots inside.
Common applications with our sensors are:
- Oxygen measurements with real-time response in microfluidic chips
- Chemical/enzymatic reactions
- High-throughput screening
- Lab-on-a-chip applications
Brochures
Applicable Sensor Types
Related Peer-Reviewed Publications
In‑situ multicore fibre‑based pH mapping through obstacles in integrated microfluidic devices
Chandrasekharan et al. 2024, Scientific Reports
https://doi.org/10.1038/s41598-024-53106-z
Microfluidic In Vitro Platform for (Nano)Safety and (Nano)Drug Efficiency Screening
Kohl et al. 2021, Nano Micro Small
https://doi.org/10.1002/smll.202006012
Measurement of respiration and acidification rates of mammalian cells in thermoplastic microfluidic devices
Müller et al. 2021, Sensors and Actuators B: Chemical
https://doi.org/10.1016/j.snb.2021.129664
Microfluidic system for Caenorhabditis elegans culture and oxygen consumption rate measurements
Krenger et al., 2020, Lab on a Chip
http://doi.org/10.1039/c9lc00829b
Downscaling screening cultures in a multifunctional bioreactor array‐on‐a‐chip for speeding up optimization of yeast‐based lactic acid bioproduction
Totaro et al. 2020, Biotechnology and Bioengineering
https://doi.org/10.1002/bit.27338
Drag Reduction by Bubble-Covered Surfaces Found in PDMS Microchannel through Depressurization
Gao et al., 2016, Langmuir
http://doi.org/10.1021/acs.langmuir.6b01186
Efficient gas–liquid contact using microfluidic membrane devices with staggered herringbone mixers
Femmer et al., 2015, Lab on a Chip
https://doi.org/10.1039/C5LC00428D