search

Trace Range Robust Oxygen Probe

TROXROB10

  • Stainless steel 10cm long, 3mm in diameter
  • For high precision measurements close to 0% oxygen
  • Works in gas (%oxygen) and liquids (DO)
  • No oxygen consumption
  • Optically isolated (OI)

The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples.

This trace oxygen probe is based on optical detection principles (proven REDFLASH technology) and can be used for precise bulk measurements in stirred/agitated water (dissolved oxygen, DO) at low oxygen conditions (<20% air sat. / 2 mg/L DO).

Trace range. Trace range versions are available for high precision measurements close to 0% oxygen. They offer about 5x higher resolution compared to standard range oxygen sensors. The specified measuring range is 0-10% oxygen, with calibration at 0% oxygen and ambient air (21% oxygen), ensuring a straightforward calibration without the need of special calibration standards.

Optical isolation. For applications at high ambient light (e.g. direct sunlight, illuminated samples) and in fluorescing / light-sensitive samples, an additional optical isolation (-OI) protection layer is added to the sensor surface to reduce enhanced sensor aging and to avoid interference with the oxygen measurements

ST-connector. This connector is our standard sensor connector for sensor compatible PC-operated and handheld FireSting devices.

Easy calibration. A simple ambient air calibration can be performed with a few clicks (<1 minute for equilibrated setup). For precise oxygen measurements close to 0% we also offer easy-to-use calibration capsules (OXCAL). Simply dissolve the content of one calibration capsule in 50 ml distilled water, wait 10-15 minutes, perform the 0% calibration and start measurements with a calibrated sensor. For detailed calibration recommendations refer to the manual in the downloads tab.

Standard stock item. This item is typically in stock and small numbers can be shipped quickly. This does not apply for larger amounts, which ship with standard delivery time.

Applications. To get an overview of potential applications and to see our sensors in action, please visit our Applications site!

Sensor Versions. There are further versions available of this sensor type.  Please use the filter function or the inquiry form to find the suited sensor version for your application.

Price List

0% O2 Calibration Capsules 

OXCAL

For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).

Every PyroScience oxygen meter with ST-connector (lab devices) is compatible with this sensor. Use this link to get a list of all compatible meters. Select additional requirements to find the optimal meter for you and your application!

 

Exemplary Setup

FSO2-C1 + TROXROB10

Choose the one channel oxygen meter FireSting-O2 with the trace range robust oxygen probe TROXROB10.

  • Ready to go lab setup

Exemplary Setup

FSGO2 + TROXROB10

Choose the pocket oxygen meter FireSting-GO2 with the trace range robust oxygen probe TROXROB10.

  • With battery and display

Exemplary Setup

FSPRO-4 + TROXROB10

Choose the multi-analyte FireSting-PRO (4 chan.) with the trace range robust oxygen probe TROXROB10.

  • + Additional pH sensor support

Would you like to stay informed?